RM3090E _V1 General _009232 SPECIFICATIONS _0050408 CLUTCH F

SPECIFICATIONS  CLUTCH  SERVICE DATA  


Pedal height from Floor (for LHD) for Gasoline- 170.7 to 180.7 mm (6.72 to 7.11 in.)
for Diesel 185 to 195 mm (7.29 to 7.67 in.)
Pedal height from Floor (for RHD) for Gasoline- 196.2 to 206.2 mm (7.73 to 8.11in.)
for Diesel 208.6 to 218.6 mm (8.22 to 8.60 in.)
Pedal free play - 5.0 to 15.0 mm (0.197 to 0.590 in.)
Push rod play at pedal top - 1.0 to 5.0 mm (0.0394 to 0.196 in.)
Clutch release point from pedal full stroke end position - 25 mm (0.98 in.) or more
Clutch disc rivet depth Minimum 0.3 mm (0.0118 in.)
Clutch disc runout Maximum 0.8 mm (0.0314 in.)
Diaphragm spring fingerwear Maximum depth
Maximum width
0.5 mm (0.0197 in.)
6.0 mm (0.236 in.)
Flywheel runout Maximum 0.1 mm (0.00394 in.)
Diaphragm spring tip non-alignment (for Diesel) Maximum 1.3 mm (0.0512 in.)
Diaphragm spring tip non-alignment (for Gsoline) Maximum 0.5 mm (0.0197 in.)
Clutch pedal switch resistance ON (pushed in)
OFF (released)
Below 1 Ω
10 kΩ or higher
Clutch pedal start switch resistance

Brake Fluid
- SAE J1703 or FMVSS No. 116 DOT3